This model was developed to accommodate users with a secure method of hand carry or HandCheck.
This latest creation using our Patent Pending concept is the V2.0 HandCheck™ from VapeSling®.
This new sling model is a Hand Sling Mod Holder. As with all our Slings, Mods of ALL SIZES, WEIGHT and SHAPE are held, comfortably and securely. Your Mod’s weight is supported by 550 Military grade paracord and our proprietary reinforced canvas. The cording is adjustable and extends up to 9″.
Handcheck_letgo
Never worry about losing or letting your Mod fall again. Take out your best Mods…you know, the one Mod you cherish the most and are so reluctant to take her out, that she never seen daylight. Sling her up on your new secure HandCheck™ and IG #handcheck safely.
Attachment is done with the cradle sandwiched between the Atty and the Batty (Atomizer and Battery). Your Mod will be in full display and always ready to vape.
Handcheck_umbrella
The HandCheck™ will also fit the 510 connections on EGO batteries. The center aperture on the HIPster cradle is designed to allow the 510 connection on all EGO batteries fit in securely. All 510 Atty’s will screw on easily. If you use an EGO Atomizer (EVOD, mini atty, etc.), we provide a 510 to EGO adapter to accommodate the threads. The 510 to EGO adapter provides the wider EGO threads for any EGO Atomizer whether you are using a 510 Mod or EGO battery.
VapeSling® is committed to earning your trust in our company and products. We stand by our products and our promise of premium quality, functionality, and customer satisfaction.
As a VapeSling® customer, you are assured top quality and integrity for your Vaping Device to be held securely. For additional assurance, we provide our VapeSling® Lifetime Guarantee. Your VapeSling (V2.0) is guaranteed to never break for “LIFE”. When you purchase your VapeSling V2.0, rest assured that it will never break while being properly used. However, in the unlikely event a break occurs, your VapeSling V2.0 is guaranteed for LIFE and will be replaced for free.
Conditions forVapeSling® Lifetime Guarantee
The following conditions apply for your VapeSling replacement*:
Please send broken VapeSling to: VapeSling LLC, 10624 S. Eastern Ave., STE A-838 Henderson, NV 89052
Please describe how the break occurred
Please enclose “proof of purchase” (receipt from vape shop or website) when shipping
Provide your name and shipping address for replacement to be shipped
Lifetime Guarantee may be void (cut with a knife, etc.)
When you buy a VapeSling, you are also joining a “Vape on the Go” family/group of vapers. Whether you have an interest or a VapeSling customer, we would like to invite you to subscribe to our Website and receive our occasional discount coupon emails and new product info. Plus, be informed in our vaping community and possibly share your views on vaping advocacy.
*One replacement for the Lifetime of your VapeSling V2.0. Legacy Slings excluded.
VapeSling® realizes, that although we offer a “Lifetime Guarantee” there may be some skeptics or wary folks when exposed to our unique Patent Pending concept, currently used on our unbreakable V2.0 Mod Holders. Our Mod Holders have some characteristics that may instill some doubt from certain individuals. First of all is that VapeSling® is completely new to the general public. In order to remove all doubt about strength, and lately, Voltage reduction, VapeSling® conducted 2 tests. One is our Voltage Test and the other is a Load bearing Test. In this post we cover the Load test. We hired NTS to conduct and film the Load test. We sent them a HIPster (which is the same cradle as the MODster and ZIPster) to gauge the load bearing on all our Heavy-duty models.
Here is a bit more on NTS:
National Technical Systems (NTS) is a privately held company providing a wide range of test, inspection and certification services. With the largest network of test laboratories in North America and over 50 years of experience to draw from, NTS is prepared to meet any challenge.
Below is a screenshot and the video of the Load Test conducted at the NTS lab in Fullerton, CA.
In this video, we sent in our VapeSling® HIPster/ZIPster model.
Note: The VapeSling® MODster uses the same cradle.
The Cradle portion of our test VapeSling is at the Bottom. On top, the 550 paracord is stretching from the 4 articulation points on the cradle. The metal cube wrapped by the cradle (at the bottom) is the anchor point and doubling as a 1″ diameter Atty. The metal cube 510 male thread is screwed thru the cradle’s center aperture into the test bed. The Cording is pulled at the top from the “Load Test Device” (LTD). The LTD slowly and gradually reaches the 100lbs point*. No breakage occurs.
Our Patent Pending VapeSling is guaranteed to hold any Mod’s shape or weight…for a good reason.
*Tester was instructed to stop at 100lbs, not when breakage occurs. Test site charges additional fees beyond 100lbs loads.
VapeSling_Load Test
Your Mod nor your VapeSling® will ever break while on your body. Truly the only “Vape and Carry” solution for vapers of all levels and Mod types. Enjoy our unbreakable heavy-duty Mod Holders ( HIPster,MODster and ZIPster). Vape and carry with confidence.
V2.0 ZIPster and HIPster Carabiner Sling by VapeSling®
VapeSling innovations are part of our daily functions. Our Patent Pending concept extends to several model types as developed by our innovation team. At trade shows, we receive valuable feedback from our customers, vendors and distributors. For development of our newest models: ZIPster and HIPster, we took into consideration that some vapers may not share the same appeal of wearing a neck lanyard sling or cross-body sling to hold their Mods or vaporizers. VapeSling® created 2 new models to accommodate vapers with an unrestricted method of “vape on the go” carry.
ZIPster_HIPster
The HIPster and ZIPster (ZIPster details below). These sling models are carabiner Mod Holders. As with all our Sling holders, Mods of ALL SIZES, WEIGHT and SHAPE are supported, comfortably and securely. Your Mod’s weight is supported at your belt loops, waistband or wherever you choose to clip the carabiner. The 50mm carabiner, with engraved VapeSling logo, will be black in color. Featuring 550 Military grade cord, extending 3″ to the, reinforced, liquid-proof black canvas cradle. The HIPster and ZIPster cradle will be the same shape, size and strength of our MODster cradle. This tough cradle will carry all the Mods, e-cigs, or vaporizers you own, securely and comfortably. As always, the cradle is sandwiched and fastened between the Atty and the Batty (Atomizer and Battery). Your Mod will be in full display and always ready to vape. No need to remove and re-attach from the HIPster or ZIPster in order to vape or hold your Mod.
HIPster_pocketview
Another HIPster or ZIPster carry method is belt loop and pocket. The Loop and Pocket can be used for support, while the Mod rests upright in the users pocket. This avoids awkward and embarrassing Mod shifts in the users pocket.
HIPster_Slinged_sideview
Additionally, if the user is a Sling owner, the HIPster can be attached to the Sling and used as a lanyard.
The ZIPster, however, includes it’s own adjustable ZIP line. The user can enjoy adjustable Sling-ed carry, and multi HIPster/Mod use on the same line.
VapeSling® Concept: The only true “Vape on the Go” Mod Holder
The VapeSling® breakthrough concept was born from E-Cig / Mod portability problems encountered with hand carry, pockets, pouches, belt clips, and all other available forms of E-Cig / Mod portability. The VapeSling® uses a unique Patent Pending “Cradle” concept which allows the user to carry, vape, and move. The VapeSling Cradle is manufactured using a 1 day, 4 point proprietary process. This process was developed to produce the strongest, yet thinnest material for our VapeSling Cradle. Thin to assure 510 contact between the Atomizer and Battery (No Voltage drops…see our Voltage Test). Strong to accommodate any Mod weight and never break. Our cradle holds 102lbs or more as proved on our Load bearing Test.
Why a VapeSling?
Ask yourself the following:
Broken or damaged Mods: falling from hand holding, pockets, pouches, clips, etc?
Your current Mod Holder does not fit nor support all your Mods?
Own a beautiful and expensive Mod? Your current carry method makes you hesitant to take it out?
Lost Mods: Set it down. Forget where you left it? Worse yet, lose it for good?
Lifestyle: Mod carry hindering work, play, phone use, etc?
Your current Mod holder wont allow vaping while on the holder?
All our VapeSlings support all your Mods. Mods of any size, shape or weight can be held.
Carry and showcase your beautiful expensive Mods without worry. Your Mod is secure on a VapeSling.
You’ll never lose your device again. With a VapeSling, your Mod is on your body, ready to vape at all times.
As we all know, Vaping is not an easy lifestyle. Holding a vaping device can be obtrusive to your daily life. With a VapeSling, your hands are free to live your life again, plus, you can vape easily at any time.
Our most essential benefit for VapeSling users is the ability to vape while you carry. Your Vaping Device is held safely and comfortably on your body and at the ready to vape.
VapeSling E-Cig Mod Holder Slings: American Made
The VapeSling LLC manufacturing facility is based in the United States and the founder / inventor is a retired American Army Soldier. Every part our VapeSling E-Cig Mod Holder Slings are proudly “Made in the USA” using premium U.S. made tactical, military grade paracord and reinforced liquid-proof black canvas. Dual layers of this canvas are stitched together for extra strength and durability (V2.0).
VapeSling® Manufacturing for Affordability and Quality
On July 10th, we moved into our new manufacturing facility in Henderson, NV. We are now producing every aspect of our VapeSling E-Cig Mod Holder Slings “in house”. VapeSling LLC made this move to keep costs down while providing the best quality control measures possible. Resulting in a premium high quality, yet reasonably priced product line called V2.0. Previously, we used manufacturing sources in the U.S. for our cradle to be machined, but this made our costs high and therefore drove our product price up. Now in our new manufacturing facility, VapeSling LLC can assure consistent quality VapeSling E-Cig Mod Holder Slings at an affordable price.
Using a VapeSling Mod / E-Cig Holder
VapeSling® Attachment
The user attaches their device to the VapeSling Cradle at the center aperture. The atomizer connector is screwed into the battery through the cradle center aperture. The cradle holds the vaping device securely between the “Atty and the Batty”. Since there is no restricting pouch, bag, etc, VapeSling® users can attach any Mod size, weight or shape, plus vape while their e-cig/mod is attached. Whether on the move or relaxing at home, the user can carry their E-Cig / Mod comfortably, securely, and always ready to vape. Additionally, there is no cumbersome retrieving or re-depositing of your e-cig/Mod into a case, pouch, bag or pockets. Most importantly, while E-Cigs or Mods are attached to VapeSling E-Cig Mod Holder Slings, there is no possibility of it falling to the ground.
Every model of our innovative VapeSling E-Cig Mod Holder Slings have been tested for comfort and strength using every personal vaporizer and Mod device available on the market. For light vaporizers and e-pens, we recommend the Slim Sling, Bling Sling or Bling Sling Luxe. For mid size (18650 or less), we recommend the Average Joe. For mid to largest Mods (ie: custom multiple battery 26650 Mods, etc.) our heavy duty models, the MODster Cross-body Sling , the HIPster, and ZIPster carabiner VapeSling E-Cig Mod Holder Slings are recommended. These 3 tough models have the largest, therefore, toughest VapeSling Cradle. Handling the largest device sizes, weights and shapes (Box, Cylindrical, etc.) comfortably and securely.
VapeSling® Mod and vaporizer Holders
Uses and Advantages
Carry. Vape. Move. Vape on the go without removing the vaporizer from your Sling
Driving: Your vaporizer is at the ready. Eyes on the road and not searching for your vaporizer/Mod.
Riding: Vaping while riding a bike or motor bike is now possible. Your Mod is at the ready for unrestricted vaping at all times.
Weight distribution: Our MODster and ZIPster models is a cross-body sling designed for today’s heavier 18650, 26650 and multiple battery Box Mods. Weight is distributed diagonally, across your body, thus achieving the best type of carry for heavier Mods.
Never lose your Mod in your own house or wherever you go, again.
Drip Vape with ease. No need to lay or set your Mod on a table to drip in your e-liquid. Drip right into your atty while on your body and attached to your VapeSling.
Drip Guard: Our liquid-proof canvas cradle will catch e-liquid spills from your Atty. E-liquid will remain on the canvas cradle (till wiped off). Atty Liquid spills will not reach your battery terminal.
Inspect your RDA coils while attached. Remove your atty cap; work any needed work; replace your cap and Vape on.
Battery replacement: All replaceable battery mods can remain attached to your VapeSling when replacing spent batteries.
Flood prevention/fix (Clearomizer and RBA mostly) – flip e-cig end over end while attached to your VapeSling; After a few seconds, the flooded e-liquid evacuates your coil thru the mouthpiece. Wipe off the mouth piece end.
4 articulation points to the VapeSling cradle for a secure platform under your Atty.
The VapeSling cradle rides up the sides of your atty, protecting your delicate Atty.
No Metal parts to scratch or damage your Mod/e-cig
Showcase your Mod in full view of it’s surface engravings, carvings, or ornamental design. Atty also affords a full frontal view
There are no Voltage drops whatsoever. This includes HYBRIDS! See our Voltage test using a Phantom Hybrid Mod: https://vapesling.com/latest-news/vapesling-voltage-drop-test/
VapeSling® Models
Note: All Slings will hold, box, cylindrical or any other geometrically challenging MOD/E-cig shape. All Mod weights supported.
Cross-Body Sling (MODster) for heavier Mods such as 18650, 26650 and multiple battery Box Mods
Carabiner Sling (HIPster , Zipster) for heavier Mods such as 18650, 26650 and multiple battery Box Mods
VapeSling® is U.S. based and all of our VapeSling Patent Pending Products are “Made in the USA”.
Only quality materials and resources go into our production line. Such as: Premium U.S. made Military grade Paracord cording and U.S made reinforced, stitched, liquid-proof black canvas cradle. This canvas composes the VapeSling Cradle used on all our Slings. We process the canvas using our 4 point – 1 day proprietary procedure. This process was developed to produce the strongest, yet thinnest material for our VapeSling v2.0 Cradle. Thin to assure 510 contact between the Atomizer and Battery (No Voltage drops…see our Voltage Test). Strong to accommodate any Mod weight and never break. Our cradle holds 102lbs or more as proved on our Load bearing Test.. Plus, our new V2.0 Silver series looks sexier than ever.
Why a VapeSling?
Ask yourself the following:
Broken or damaged Mods: falling from hand holding, pockets etc?
Lost Mods: Set it down. Forget where you left it? Worse yet, lose it for good?
Lifestyle: Mod carry hindering work, play, phone use, etc?
Your current Mod holder wont allow vaping while on the holder?
VapeSling can help with all of these issues.
Your Mod will never break because our Slings never break nor let go of your device. See “Lifetime Guarantee”
You’ll never lose your device again. When you use a VapeSling, your Mod is on your body, ready to vape at all times.
As we all know, Vaping is not an easy lifestyle. Holding a vaping device can be obtrusive to your daily life. With a VapeSling, your hands are free to live your life again, plus, you can vape easily at any time.
Our most essential benefit for VapeSling users is the ability to vape while you carry. Your Vaping Device is held safely and comfortably on your body and at the ready to vape.
Users at all levels have encountered some form of portability issue. There are a few portability products/holders out on the market, however, limited in usage, especially for large Mods…until now:
The VapeSling breakthrough concept was born from e-cig/mod portability problems encountered with hand carry, pockets, pouches, belt clips and all other available forms of e-cig portability. VapeSling Patent Pending Products use a unique concept that allows users to carry their e-cig / mod comfortably & securely so they’re always ready to vape. VapeSling users can vape while their e-cig/mod is attached to their Sling. Whether on the move or on a couch, a user can carry their e-cig/mod comfortably, securely and always at the ready to vape.
VapeSling users will also enjoy displaying their e-cig/mod in all its glory. There are many ornamental e-cig/mod and atomizers (attys) out there. It’s a shame to hide them in a pocket, pouch or belt clip. Most have some detail or Art to display on the e-cig/mod surface. Whether it’s an etching, carving, or colors, the art can be fully displayed while attached to a VapeSling. Our Patent Pending cradle design, also supports, protects and covers the sides of your atty, yet the front art is displayed.
With the use of VapeSling neck Lanyard sling or Cross-Body Sling, portability and display issues just vaporized.
Our Legacy Mod Holder Slings are the same as V2.0 with the exception of the sexy embroidered cradle. We will continue to offer our Legacy Slings while supplies last. We have drastically reduced prices to make room for new V2.0 VapeSling products. The Average Joe, Slim, and Bling Sling Luxe will make their V2.0 debut soon. For now, enjoy this “Legacy Slings Clearance Sale” with these incredibly low prices on all our Quality Legacy Slings.
V2.0 VapeSling Cradle Manufacturing
We are very happy to inform, on July 10th, 2015, VapeSling LLC moved in to our new manufacturing facility in Henderson, NV. We will be producing every aspect of our Slings “in House”. We made this move to control the manufacturing procedure, keep our costs down, and provide the best quality control measures possible. Resulting in a premium high quality, yet reasonably priced product line called V2.0. Previously, we used manufacturing sources in the U.S. for our cradle to be machined. Our costs were high and therefore drove our product price up. Now in our new manufacturing facility, VapeSling can assure a consistent quality product at an affordable price for our customers.
V2.0 Silver Series Cradle
We are very proud to finally brandish our cradle with an embroidered, silver colored Logo. Silver for our fine state of Nevada, The Silver State. While dressing up our cradle, we also made it stronger. Our 6 point proprietary process plus boundary stitching completes the toughest and sexiest combination for the VapeSling cradle.
Models with V2.0 cradle
We have 3 models available with the V2.0 VapeSling cradle:
The ZIPster is a new creation that came at the same time as the V2.0 cradle. This is an adjustable (0-30″) ZIP sling and separate carabiner clip. You can choose to Clip, ZIP and Vape…or Clip and store.
Check out the video demonstration on You tube for the ZIPster:
We are very happy to inform, on July 10th, 2015, VapeSling LLC moved in to our new manufacturing facility in Henderson, NV. We will be producing every aspect of our Slings “in House”. We made this move to control the manufacturing procedure, keep our costs down, and provide the best quality control measures possible. Resulting in a premium, high quality, yet reasonably priced product line called V2.0. Previously, we used manufacturing sources in the U.S. for our cradle to be machined. Our costs were high and therefore drove our product price up. Now in our new manufacturing facility, VapeSling can assure a consistent quality product at an affordable price.
Our Legacy Slings are the same as V2.0 with the exception of the sexy embroidered cradle. We will continue to offer our Legacy Slings while supplies last. We have drastically reduced prices to move and make room for our V2.0. The Average Joe, Slim, and Bling Sling Luxe will make their V2.0 debut soon. For now, enjoy these incredibly low prices on our Quality Legacy Slings.
V2.0 Silver Series Cradle
We are very proud to finally brandish our cradle with an embroidered Logo. Silver colored for our fine state of Nevada, The Silver State. While dressing up our cradle, we also made it stronger. Our 4 point proprietary process plus boundary stitching completes the toughest and sexiest combination for our VapeSling® cradle. This process was developed to produce the strongest, yet thinnest material for our VapeSling v2.0 Cradle. Thin to assure 510 contact between the Atomizer and Battery (No Voltage drops…see our Voltage Test). Strong to accommodate any Mod weight and never break. Our cradle holds 100lbs or more as proved on our Load bearing Test. For extra assurance, we are also applying a “Lifetime Guarantee” to our VapeSling v2.0. Plus, our new V2.0 Silver series looks sexier than our plain Legacy cradle.
Models with V2.0 cradle
We have 3 models available with the V2.0 VapeSling® cradle:
The ZIPster is a new creation that came at the same time as the V2.0 cradle. This is an adjustable (0-30″) ZIP sling and separate carabiner clip. You can choose to Clip, ZIP and Vape…or Clip and store.
Check out the video demonstration on You tube for the ZIPster:
VapeSling LLC has attended several great Trade Shows. In these Trade Shows we had the grand opportunity to speak with our customers face to face. One of the biggest concerns seems to be connectivity and Voltage drop. Our VapeSlings require installing a support cradle between the ATTY and the BATTY. Since this is the electrical connection, it’s natural to assume some power issues. However, VapeSling LLC recently conducted a “Voltage Drop Test” and found this assumption to be false.
Posted below is a video featuring JG from VapeSling LLC and Guy Addy from Vape2O vape shop in Henderson, NV. A Phantom Hybrid Mod with a Royal Hunter RDA was the device used in our test.
The Voltage Measuring device used is a Digital Multimeter. The Leads on the Digital Multimeter were “touched” or connected to the positive and negative posts of the RDA during operation of the Hybrid Mod.
The first part of the test was done without the VapeSling Cradle in place. A reading of 3.4 to 3.6 Volts was read on the Digital Multimeter.
The Second part of the test was done with the VapeSling Cradle installed between the ATTY and the BATTY. A reading of 3.4 to 3.6 Volts was read on the Digital Multimeter.
Results of the test: There is no drop in Voltage or loss of connectivity between your Atomizer and Battery when using a VapeSling…Even with Hybrid Mods!
The Voltage Measuring device used is a Digital Multimeter. The Leads on the Digital Multimeter were “touched” or connected to the positive and negative posts of the RDA during operation of the Hybrid Mod.